2 Installation
© Copyright Reserved Autonics Co., Ltd. 31
Pay attention to the following when installed:
Do not let conductive substances from panel cut-out or wiring ducts enter into LP.
Make sure to allow enough space to handle the LP.
Secure enough space to maintain inside temperature and humidity of the panel when you mount
LP.
2.5 USB driver installation
GP/LP USB Driver’ is driver for communication PC and LP-S070 by USB cable.
Before installing ‘GP/LP USB Driver’, visit our homepage(www.autonics.com) and download
setup file.
Downloaded zip file name is as following.
GP_LP_Series.inf, GP_LP_Series.sys
2.5.1 Install with found new hardware wizard
1st Connect LP-S070 to PC with USB cable and ‘Found New Hardware Wizard’ operates.
Select ‘No, not this time’ and click ‘Next’.
To Next Page
Loading...