7 User Screen
© Copyright Reserved Autonics Co., Ltd. 141
(2) Screen switching methods
It is switched to the appropriate screen when changing screen switching device value. It is
changed as below methods.
1) Using touch key for switching screen
There are switching function of touch key operations as follows.
Switching to the fixed screen
Switching to the previous screen
Switching to the adjacent lower number of screen
Switching to the adjacent upper number of screen
2) Numeral input
It is switched to the appropriate screen inputting screen number in screen switching
device using numeral input tag.
3) Device monitor
It is switched from device on device monitor of system screen to the appropriate
screen inputting the value in screen switching.
4) Screen switching a screen by PLC program
When changing a screen switching device on PLC program, LP switches it into the
appropriate screen.
7.4 Overlap window function
LP monitors user-defined of 2 screen overlap devices and overlaps the screen satisfying current
value of the device on a base screen.
In order to use screen overlap function, designate the device for overlap window in GP Editor.
The overlap window is displayed in order of window 1, 2 on current screens as below. In case,
the value of overlap window device is exceeded the range (1 to 500) or does not exist, the
window is not displayed.
To Next Page
Loading...