6 System Screen
© Copyright Reserved Autonics Co., Ltd. 81
6.4.2 Serial details configuration
(1) CH1/ CH2 details configuration
①
Designate operation mode.
CH1, CH2 protocol: Communication mode for set PLC by LP and GP Editor by
each port.
EDITOR: I/O mode for downloading user-designed data from GP Editor
PRINTER: Print mode for printing alarm history of LP
BARCODE: Input mode for reading data from barcode
For further details, refer to Barcode description.
MONITOR: Available only in CH2. Monitoring mode for PLC which is connected to
LP from PC directly.
LP is as transmitter by transmitting data from PC to PLC and data from PLC to PC.
In case of MITSUBISHI FX-Series, editor mode is available for monitoring.
To Next Page
Loading...