6 System Screen
80 © Copyright Reserved Autonics Co., Ltd.
Item Operation with touching
③Displays CH2 protocol
(as downloaded protocol
for default)
Rotates in order as downloaded protocol in GP Editor →
EDITOR → PRINTER → BARCODE
④ Displays CH2 connect
port
(Designates automatically
as non-using port in ②)
LP-S070-T9D6: RS422 PORT ↔ RS232C PORT
LP-S070-T9D7: RS232C A PORT ↔ RS232C B PORT
⑤Communication
configuration by each
channel
Moves communication configuration setting window for selected
connected device.
You can designate baudrate, data bit, parity, stop bit, and flow
control for each channel.
If CH1 is as NoUse, it is not able to communication
configuration.
To Next Page
Loading...