4 System Organization
© Copyright Reserved Autonics Co., Ltd. 67
4.7.1 GP Editor configuration
1st Select [Common]-[GP/PLC Type] of GP Editor menu.
Desigante GP/LP type as the model name of ‘LP-S070’ by pull-down menu.
2nd Select [Communication]-[Option] and ‘Option’ dialog box appears.
Designate communication configuration as same as that of from LP-S070.
For further details of each option, refer to ‘GP Editor user manual’.
3rd After configuration, connect LP-S070 and PC by communication cable to download
and upload drawn program from GP Editor.
To Next Page
Loading...