4 System Organization
66 © Copyright Reserved Autonics Co., Ltd.
② Ethernet setting: Select ‘Local Ethernet’ menu.
You can designate IP address, subnet mask, and gate way of LP-S070 and check
MAC address.
IP setting of LP should not be duplicated with other communication devices. If IP address
between other communication devices, communication is not able to operate by IP conflict.
③ USB setting: LP system menu does not have the setting of USB device. If there is
Autonics USB driver in connected PC with LP, you can use it by PC.
4th Touch ‘BEFORE’, current setting values are saved and it returns to previous menu.
Touch ‘CLOSE’, current setting values are saved and it returns to user screen after
exiting system setting menu.
To Next Page
Loading...