Autonics LP-S070 - LP Basic Specification

1 Overview
18 © Copyright Reserved Autonics Co., Ltd.
1.4.3 LP basic specification
Function
Description
Monitoring
Device monitor Monitors connected PLC device and changes the status
I/O monitor Monitors I/O status of LP-S070
Environment
Language Designates system language and character set
Serial
communication
Configures serial port for connecting between GP Editor and
connected device, printer, barcode reader, or monitor
Local Ethernet Designates IP of LP-S070
Clock Designates current time and date
Screen bright Designates backlight brightness
Assistance
setting
Key of system setting menu: Designates the position for
calling system setting menu
Buzzer: Designates using buzzer or not
Screen open time: Set time for open screen when supplying
power
Off time of back light: Set off time for backlight
Data
Data manager Manages USB_DISK and GP/LP_DISK
Base screen Displays user-defined base screen title and number
Window screen Displays user-defined window screen title and number
Comment Displays downloaded comment list in LP
Firmware update Enables to update firmware
System
System information: Displays current system information of
LP
Disk capacity: Checks total disk capacity and available disk
capacity of LP
Functionality
Data transfer
Displays this menu during communicating (download/upload)
between LP and GP Editor
Time switch Designates time switch
Print out Prints out alarm history with printer
Data logger Saves the specified device value by user-defined condition
Diagnostics
System
initialization
Initializes every set value of system as default value
Battery remaining
Displays battery remaining with percentage (%) and bar
graph.
Screen diagnosis
Checks LCD bad pixel and font by diagramming color and
figures as pattern.
Touch diagnosis Diagnosis touch
Parameter
Common Setting
Check motion common setting values which are designated
from SmartStudio
Action/Pattern
List
Check motion action/pattern list which is designated from
SmartStudio