Autonics LP-S070 - Ethernet Interface

1 Overview
22 © Copyright Reserved Autonics Co., Ltd.
1.5.1.3 Ethernet interface
IEEE802.3(U), 10/100 Base-T
You can download designed data of GP Editor and PLC program of SmartStudio by connecting
PC.
 Crossover – Cable
PC1
Cable color
PC2
Signal
Pin no.
Signal
Pin no.
Tx+ 1 White Orange 3 Rx+
Tx- 2 Orange Orange Rx-
Rx+ 3 White Green 1 Tx+
4 Blue Blue
5 White Green 5
Rx- 6 Green Green Tx-
7 White Brown 7
8 Brown Brown
Tx: Transmit Data
Rx: Receive Data
For connecting line sharer, use direct cable.
 Straight(Direct) through – Cable
PC1
Cable color
PC2
Signal
Pin no.
Signal
Pin no.
Tx+ 1 White Orange 1 Rx+
Tx- 2 Orange 2 Rx-
Rx+ 3 White Green 3 Tx+
4 Blue
5 White Blue 5
Rx- 6 Green Tx-
7 White Brown 7
8 Brown
Tx: Transmit Data
Rx: Receive Data