Autonics LP-S070 - Action List

6 System Screen
134 © Copyright Reserved Autonics Co., Ltd.
6.8.2 Action list
This menu is the saved list of unit action’s setting value to use motion control easily.
For detail action list information, refer to ‘SmartStudio user manual’.
You can edit and register basic action by one cycle with user defined common setting items.
No.
Function and operation
①
After checking ‘Using Internal Device’ from [Parameter]-[MOTION] tab in SmartStudio
and after downloading the program, you can edit directly the desired items at
[Parameter]-[Action list] of system menu in LP-S070.
②
Action list. You can check the user defined items, or edit these by ‘Using Internal Device’
function in ‘SmartStudio’.
③
With scrollbar, you can check lower or upper user defined action list items.
④ Touch ‘NEXT’ or ‘BACK’ and moves to pattern list menu or returns to previous menu.