11 Appendix
© Copyright Reserved Autonics Co., Ltd. 171
UW6540(F140) Type Cause of error
error process the program, such as user defined functions,
label name, END, RET and IRET, etc.
0X0040
Parameter setting
error
When there are some problems in settings for
common and expansion parameters.
0X0041 Time-driven error
When it operates longer than the given time-driven
run-time.
0X0050
Extended module
setting error
In case the hardware constructions are different from
previous parameter settings when applying power
again and changing the mode.
0X0051
Extended module
attaching and
removing error
When the extended module is attached or removed
in run mode.
0x0060
Communication fail
error
When it is received NAK and data format not able to
read.
0x0061
Communication
format error
When there are some problems occurred in formats
(excess of limited range etc.) and CHECK SUM while
download and upload.
11.4 ASCII code table
To Next Page
Loading...