Autonics LP-S070 - Application of UW, UB Corresponding

3 Device Construction
© Copyright Reserved Autonics Co., Ltd. 53
3.3 Application of UW, UB corresponding
LP series is integrated with PLC and HMI device as one. You can monitor and control the device
of the additionally connected devices (PLC, etc).
General PLCs usually have same device name regardless manufacture and model type.
To monitor and control the device of the connected external device with LP series, it is needed to
divide devices between PLC’s and LP’s.
To divide devices between PLC’s and LP’s during drawing the data in GP Editor, LP device
should be as UW, UB device as following ‘13.5 UW correspondence table’.
Additionally connected controllers is drawn with their characteristics device name.