6 System Screen
130 © Copyright Reserved Autonics Co., Ltd.
No. Function and operation
① Touch this, it moves diagnostics screen and starts diagnosing touch.
②
First cross reference point of diagnosis is activated at left-upper based on the screen.
Only when you touch within the diagnosis point, next touch diagnosis point is activated
in order.
Based on the screen, touch diagnosis points are activated in order as left-upper → left-
lower → right-upper → right-
If you touch outside of the diagnosis point, error message appears. Touch ‘RESET’ and
diagnose touch again.
③ Returns to previous screen.
④ Re-starts touch diagnosis.
⑤ When touch diagnosis is completed, saving message for diagnosis value appears.
To Next Page
Loading...