9 Troubleshooting
148 © Copyright Reserved Autonics Co., Ltd.
(3) Troubleshooting in error for external input
Check as following list by number. If error is not solved, please notify this to our service
center.
No Check item
1 Is input wiring connection correct?
2 Is connection status of input connector fine?
3
In case of removing connected input device and connecting COM port of input terminal
to input port, is input value entered correctly?
(You can check input value in monitoring function of LP-S070 or in SmartStudio.)
4 Is there a problem to input device operation?
(4) Troubleshooting in error for external output
Check as following list by number. If error is not solved, please notify this to our service
center.
Check item Error
Is output wiring connection correct?
Is connection status of output connector fine?
Is connected power voltage to output within allowable voltage range?
Is there problem to output device operation?
(5) Troubleshooting in communication connection error
Check as following list by number. If error is not solved, please notify this to our service
center.
Check item Error
Do you designate communication configuration (baudrate, data bit, stop
bit, and parity) correctly?
Is the specification and wiring of communication cable rated at our
specification?
※
1
For connect LP-S070, external device and PC, you must use the provided cable (sold
separately).
To Next Page
Loading...