6 System Screen
74 © Copyright Reserved Autonics Co., Ltd.
①
Designate channel for connected device.
Touch this it changes as Channel 1, Channel 2, Internal.
② Designate station. (Range: 0 to 255) Touch this and decimal key pad appears.
③
Input key pad appears to select the device of selected device by channel (Channel 1,
Channel 2, Internal).
④
Monitors the specified word device as decimal with sign, decimal without sign, or
hexadecimal.
⑤
Moves lower device.
⑥
Moves upper device.
⑦
Select the specified bit device. Touch this and hexadecimal key pad appears.
⑧
Select the specified word device. Touch this and decimal key pad appears.
⑨
Cancels setting value input.
⑩
Enters setting value input. .
To Next Page
Loading...