Autonics LP-S070 - Page 78

6 System Screen
78 © Copyright Reserved Autonics Co., Ltd.
Item Operation with touching
②Displays CH1 connect port
(Designates automatically as
non-using port in ④)
LP-S070-T9D6: RS422 PORT ↔ RS232C PORT
LP-S070-T9D7: RS232C A PORT ↔ RS232C B PORT
③Displays CH2 protocol
(as EDITOR for default)
Rotates in order as EDITOR → PRINTER → BARCODE
→ MONITOR → UNIVERSAL → No Use
If CH1 is SLAVE, MONITOR does not appear.
④ Displays CH2 connect port
(Designates automatically as
non-using port in ②)
LP-S070-T9D6: RS422 PORT ↔ RS232C PORT
LP-S070-T9D7: RS232C A PORT ↔ RS232C B PORT
⑤Communication configuration
by each channel
Moves communication configuration setting window for
selected connected device.
You can designate baudrate, data bit, parity, stop bit, and
flow control for each channel.