6 System Screen
© Copyright Reserved Autonics Co., Ltd. 87
(ON). If backlight control device is RESET (OFF), it does not operate irrespectively menu
setting.
For further details, refer to ‘GP Editor user manual’.
※1. In case screen direction is vertical (bottom side from front screen is placed at left status),
default position of system setting menu key is placed at left-upper point.
Touch left-upper point as soon as re-supply power and it enters to system setting menu.
If there is numeral/ASCII input or touch key tag at system setting menu key position, it
executes only tag operation and it does not enter system setting menu.
To Next Page
Loading...