The following figure displays the port edit work area with the VLAN tab selected.
Figure 8: Port edit -VLAN tab
• From the Device Physical View, click a port, and then from the Navigation tree select any
tab from the Edit > Chassis > Ports work flow, and modify editable parameters.
The following figure displays the Edit > Chassis > Ports work area with the Interface
tab selected.
Figure 9: Edit, Chassis, Ports - Interface tab
• From the Navigation tree select a port-related tab from a specific, applicable feature work
area (for example, VLAN, VLANs, Ports), and double-click a cell under an editable
parameter column heading in the appropriate port row of the table.
The following figure displays the VLAN > VLANs > Ports tab work area.
Enterprise Device Manager concepts
Fundamentals December 2011 33
To Next Page
Loading...
