Avaya 4550T-PWR+ - Page 92

ACLI commands ACLI mode
show cpu-utilization
show cpu-utilization unit <1-8>
show eapol Config, PrivExec
show eapol auth-diags interface <ports>
show eapol auth-stats interface <ports>
show eapol guest-vlan
show eapol guest-vlan interface <ports>
show eapol multihost
show eapol multihost multivlan
show eapol multihost fail-open-vlan
show eapol multihost interface <ports>
show eapol multihost non-eap-mac interface <ports>
show eapol multihost non-eap-mac status
show eapol multihost non-eap-mac status <ports>
show eapol multihost status
show eapol multihost voip-vlan
show eapol port <port>
show environmental Config, PrivExec, Exec
show flash Config
show flash unit <1-8>
show http-port Config, PrivExec
show interface <ports> Config, PrivExec
show interface gbic-info
show interface gbic-info <ports>
show interface names <ports>
show interface verbose
show ip Config, PrivExec, Exec
show ip address
arp Config
no arp
arp timeout
ACLI quick reference
92 Fundamentals December 2011
Comments? infodev@avaya.com