Avaya 4550T-PWR+ - Page 93

ACLI commands ACLI mode
default arp timeout
show arp Config, PrivExec, Exec
show arp <ip>
show arp dynamic
show arp dynamic <ip>
show arp dynamic –s <ip-subnet> <subnet-mask>
show arp –s <ip-subnet> <subnet-mask>
show arp static
show arp static <ip>
show arp static –s <ip-subnet> <subnet-mask>
show arp summary
show ip arp-inspection
show ip arp-inspection interface
show ip arp-inspection interface <ports>
show ip arp-inspection interface fastEthernet <ports>
show ip arp-inspection vlan
show ip arp-proxy interface
show ip arp-proxy interface vlan <vlan-id>
show spanning-tree mode Config, PrivExec, Exec
show vlan ip <vlan-id> Config, PrivExec
show vlan vid <vlan-id>
spanning-tree mode Config
spanning-tree stp
show ip blocking-mode Config, PrivExec, Exec
show ip bootp
show ip bootp address
show ip bootp address source
show ip bootp address stack
show ip bootp address switch
show ip bootp address unit <1-8>
show ip default-gateway
ACLI commands listed by mode
Fundamentals December 2011 93