Procedure
1. For all 9600 Series IP Telephones except the 9670, press the Avaya (A) Menu button.
2.
• For 9600 Series IP Telephones without administered WML applications, select VPN
Settings.
• For 9600 Series IP Telephones with administered WML applications, select Phone
Settings first, then VPN Settings.
• For the 9670, touch Settings, then VPN Settings.
3. If the phone prompts you to "Enter Password and press Enter (or OK)" use the dialpad to
enter the VPN Access Code assigned by the administrator and press Enter or OK. On a
9670, enter the VPN Access Code and touch Enter.
When the access code is validated the VPN Settings screen displays. See Viewing the VPN
Settings Screen for a description of this screen.
VPN settings screen fields
Line/Field Description Associated System Parameter
VPN If "1" the Virtual Private Network is
enabled. If "0" VPN is disabled.
NVVPNMODE
VPN Vendor Name of the security gateway
vendor.
NVVPNSVENDOR
Gateway Address IP address of the VPN security
gateway. This value allows the
telephone to access the VPN
tunnel.
NVSGIP
External Phone IP Address External ("outer") IP address of
the telephone in VPN mode.
NVEXTIPADD
External Router External ("outer") router IP
address in VPN mode.
EXTGIPADD or NVEXTGIPADD
External Subnet Mask External ("outer") subnet mask in
VPN mode.
NVEXTSUBNETMASK
External DNS Server External ("outer") DNS server IP
address in VPN mode.
EXTDNSSRVR or
NVEXTDNSSRVR
Encapsulation The port numbers used for IKE
and IPsec UDP encapsulation,
and support for NAT traversal.
NVVPNENCAPS
Copy TOS Indicates whether to copy the TOS
bits from the tunneled (inner) IP
NVVPNCOPYTOS
Table continues…
VPN settings screen fields
March 2015 VPN Setup Guide for 9600 Series IP Telephones 19
Comments? infodev@avaya.com
To Next Page
Loading...
