Avaya 9600 Series - Appendix A: VPN Parameters; VPN Configuration Profiles

Appendix A: VPN parameters
VPN configuration profiles
Based on the value of NVVPNCFGPROF, the other persistent parameters listed inTable 2 below will
automatically be set to the value specified Column 2. If a value is not specified for a persistent
parameter in the table below, the value of the parameter will not be changed. If the value of
NVVPNCFGPROF is "0", no values will be set for the other persistent parameters shown here.
The administrator can set any of the parameters listed individually, however allowing them to be set
automatically ensures that related settings are correct.
Table 1: Security Gateway System Parameters
Supported Device as set by the administrator System Parameter Values (set automatically)
Checkpoint Security Gateway (NVVPNCFGPROF =
2)
Sets the following values (to):
• NVIKECONFIGMODE (1)
•
NVIKEID ("" - Null String)
• NVIKETYPE (11)
• NVIKEOVERTCP (1)
• NVIKEXCHANGEMODE (2)
• NVVPNAUTHTYPE (6)
• NVVPNSVENDOR (3)
Cisco PSK with XAUTH (NVVPNCFGPROF = 3) Sets the following values (to):
• NVIKECONFIGMODE (1)
• NVIKEID ("" - Null String)
• NVIKETYPE (11)
• NVIKEXCHANGEMODE (1)
• NVVPNAUTHTYPE (4)
• NVVPNSVENDOR (2)
Cisco Cert with XAUTH (NVVPNCFGPROF = 8) Sets the following values (to):
• NVIKECONFIGMODE (1)
• NVIKEID ("" - Null String)
Table continues…
46 VPN Setup Guide for 9600 Series IP Telephones March 2015
Comments? infodev@avaya.com