Accepting the current user name
Procedure
To accept the user name displayed, press/touch Enter.
Related Links
VPN user name entry screen on page 34
Entering a new VPN user name
Procedure
1. Press/touch
Clear.
2. Use standard keyboard text entry to enter the new name.
3. Press/touch Enter to save the entry as the NVVPNUSER value.
If a password is already stored in memory, the VPN Password Reuse screen shows.
If a password is not stored in memory, the VPN Password Entry screen shows.
Related Links
VPN user name entry screen on page 34
VPN Password Reuse screen
About this task
This screen displays to authenticate an existing password or to allow access to the VPN Password
Entry screen for entry of a new password.
Procedure
1.
To accept the current password, press/touch Enter. Authentication of the user name and
password occurs and if successful, the VPN Tunnel setup screen redisplays. If
authentication is unsuccessful, the VPN Authentication Failure screen displays; press/ touch
Continue to reenter the user name and/or password.
2.
To delete the current password and enter a new password, press/touch Clear to display the
VPN Password Entry screen. Enter at least one character to display the VPN User Name
Editing screen, described in the VPN Password Entry screen procedure that follows.
VPN password entry screen
This screen displays to authenticate an existing password or to allow access to the VPN Password
Entry screen for entry of a new password.
Related Links
Accepting the current password on page 36
Entering a new password on page 36
User Authentication
March 2015 VPN Setup Guide for 9600 Series IP Telephones 35
Comments? infodev@avaya.com
To Next Page
Loading...
Need help?
General
