Avaya IP401 - Technical Specifications; General

Technical Data
Installation Manual Page 97
IP Office 2.1 40DHB0002USCL Issue 10c (11th May 2004)
Technical Specifications
General
Unboxed Boxed Dimensions
Width Height Depth Width Height Depth
401 255mm (10") 71mm (2.8") 235mm (9.3") 304mm (13.4") 105mm (4.2") 305mm (12")
403/406/412
and Expansion
Modules
445mm
(17.5")
71mm (2.8") 245mm (9.7") 445mm (17.5") 71mm (2.8") 245mm (9.7")
Environmental: 0 to +40C. 95% relative humidity, non-condensing.
Weight (unboxed) Weight (boxed) Power
Consumption
Kg lbs Kg lbs (nominal
Watts)
401 1.2 2.6 2.4 5.4 24
403 2.6 5.8 3.85 8.6 26
406 3.0 6.6 4.3 9.6 16
412 3.0 6.7 4.3 9.6 17.5
Alog16 2.9 6.5 4.2 9.4 5
DT/DS16 3.0 6.7 4.3 9.6 24
DT/DS30 3.5 7.8 4.8 10.8 30
WAN3 2.8 6.3 4.1 9.2 12
So8 2.8 6.3 4.1 9.2 24
Phone8 2.8 6.3 4.1 9.2 12
Phone16 2.9 6.5 4.2 9.4 16
Phone30 3.1 6.94 4.4 9.7 30
Module Power Supply Input:
• 2.5mm DC inlet socket. 24Vdc Power input. Rating 24Vd.c., 2A max.
Lump-in-Line PSU:
• Power Requirements: I/P 100-240Vac, 50/60Hz, 81-115VA, Input current 2A max
• Standard PSUs: O/P 24Vdc, 1.875A, output power 45W max. DS30 80W PSU: O/P 16Vdc, 5A, output
power 80W max.
•
Lump-in-line PSUs are CE/UL/Dentori Safety Approved.