Installation Manual Page 69
IP Office 2.1 40DHB0002USCL Issue 10c (11th May 2004)
System Handover
Checklist
Equipment :
• Have all extensions been tested?
• Have all exchange lines been tested?
• Have all private wires been tested?
• Is system programming in line with the customer specification? E.g. all specified applications, CTI
settings, etc.
• Has the customer been made aware of the drop back (power fail) locations? Are these been
clearly marked and have they been tested?
• Has the mains supply (and any UPS if fitted) been tested?
• Where VoIP is to be deployed have the appropriate network design criteria and QoS mechanisms
been applied as per the Avaya planning guidelines.
Wiring
:
• Have the trunk modules and Analog Trunk 16, where equipped, been fitted with the appropriate
functional/protective grounds (see Grounding
).
• Is the distribution wiring (structured cabling) satisfactory to the required national standards?
• Are all wires and cables clearly labeled.
• Is the site clean and tidy with all rubbish removed?
Information
:
• Have the telephone user guides been issued to the user.
• Has the customer been made aware of the telephone number for maintenance/fault reports.
Feature Key
:
• Where a Feature Key has been used (for software requiring a license), record it's physical
location (location of the PC is it plugged into) and leave a record of such on site with the system.
To Next Page
Loading...
