Chapter 6: Managing contacts
Adding a new contact
About this task
Use this procedure to add a contact to the phone. You can save a maximum of 250 contacts.
Procedure
1. Do one of the following:
• If there is no contact in the contacts list, press Contacts > New or press Main Menu >
Contacts > New.
• If there is at least one contact in the contacts list, press Contacts > More > New or press
Main Menu > Contacts > More > New.
2. Use the dial pad to enter the name.
• Press the number key that corresponds to the letter or number that you want to enter.
• If the characters are on the same key, pause before entering the next character.
• To enter a space, press 0.
• Enter the remaining letters or numbers.
• To enter a symbol, press More > Symbol. Use the navigation arrows to highlight the
symbol that you want to enter and press Insert.
• To delete the last character, press the Bksp softkey.
3. Enter the number.
The contact number can include uppercase and lowercase letters, numbers 0-9, and special
symbols, such as comma (,), plus (+), and dot (.).
4. Press Save.
Editing a contact
About this task
Use this procedure to edit a contact in the contacts list. In IP Office environment, during failover, the
Edit softkey is not available.
March 2017 Using Avaya J129 IP Phone 28
Comments on this document? infodev@avaya.com
To Next Page
Loading...
