About server port connections
Installing and Configuring the Avaya S8400 Server January 2008
11
S8400 environmental specifications are shown in Tab le 3.
About server port connections
The following section explains how to connect the Ethernet ports on the back of the server.
Ethernet ports
All Ethernet ports on the backplane I/O adapter of the S8400 Server can connect to the
customer LAN.
For control and adjunct connectivity, the S8400 Server supports the internal Processor Ethernet
(PE) or separate C-LAN. Messaging and administration use the customer link. If LAN
connectivity is required for administration only, PE is not required.
Server cable adapter
The server cable adapter is mounted on the rear of the TN8400AP Server circuit pack
(Figure 1: Server cable adapter
on page 12). The server cable adapter provides the connection
between the backplane pins and the RJ-45 connectors for:
● Four backplane Ethernet ports
● One backplane USB port
Table 3: S8400 environmental specifications
Parameter Specifications
Air Temperature Server on:
41.0°F to 104.0°F (5°C to 40°C)
altitude: -1,257 ft to 10,617 ft
(-383 m below sea level to 3,286 m above sea level)
Humidity 10% to 90%
Voltage and Current
Requirements
+5 VAC, 10 A
To Next Page
Loading...
