Avaya S8400 - Avaya Installation Wizard; About the Avaya Installation Wizard

Chapter 4: Server configuration
34 Installing and Configuring the Avaya S8400 Server January 2008
● Set Modem Interface
● Configure MPC
● Update System
Use your pre-installation planning forms to enter information on these pages. For more
information on these pages, see Configuring the server manually
on page 31 or click on
the Help button at the bottom of each page.
CAUTION:
!
CAUTION: If the S8400 is hosting an IA 770 AUDIX Messaging Application with Digital
Networking, the name must be 10 characters or less.
6. When you complete all the fields, click Continue on the Update System page. The Update
System page displays each configuration task as it completes it. The last line says,
"System modifications completed."
Avaya Installation Wizard
About the Avaya Installation Wizard
Use the Avaya Installation Wizard to:
● Set the date, the time, and the time zone
● Configure the server
● Configure the Maintenance Processor Complex
● Install the RFA license file
Note:
Note: To install the license file the server does not have to be connected to the SIPI.
However, you have only 30 minutes before the system checks the serial number
on the SIPI. To add another 30 minutes, type reset system 1 and press Enter
in a SAT session to restart the Communication Manager software.
● Install the Avaya authentication files
● Install software updates
● Set the product ID
● Set the alarming
To use the Installation Wizard, you can either:
● Import the data from the completed Electronic Preinstallation Worksheet (EPW). When the
Installation Wizard prompts you to import the Preinstallation Worksheet, click Import EPW
and browse to the location of the EPW file on your Services laptop computer. The
Installation Wizard opens the EPW and uploads the configuration data.