Installing and Configuring the Avaya S8400 Server January 2008 51
Chapter 7: Postinstallation administration
This section covers the following tasks:
● Verifying translations on page 51
● Setting rules for daylight savings time on page 52
● Setting locations (if necessary) on page 53
● Verifying the date and the time (main server only) on page 54
● Clearing and resolving alarms on page 55
● Backing up files to the compact flash media on page 56
● Enabling alarms to INADS by way of a modem on page 55
● Enabling alarms to INADS by way of the SNMP module on page 55
● Before leaving the site on page 56
Verifying translations
1. Open a SAT session on the server.
2. To view all the administered circuit packs in the system, type list configuration all
and press Enter.
IPSI For more information, see your planning documents and check the administration status
on the following items:
● list station
● list trunk-group
● list hunt-group
To Next Page
Loading...
