Avaya S8400 - UPS Leds

Chapter 8: Installation verification
64 Installing and Configuring the Avaya S8400 Server January 2008
UPS LEDs
The UPS LEDs flash briefly after the UPS is plugged in. The normal mode LED flashes after a
self-test to indicate that the UPS is in standby mode.
For more information, see the UPS user guide for the Powerware UPS.
Figure 7: LEDs on the Powerware 9125 UPS
Figure notes:
1. Normal mode indicator
2. Battery mode indicator
3. Bypass mode indicator
4. Test/Alarm reset button
5. Off button
6. On button
7. Bar graph indicators
8. Alarm indicators
1
2
3
4 5
6
7
8
ledlups KLC 030102