Avaya S8400 - Connecting the Laptop; 8 a Connecting the Laptop (G600)

About SSH
Installing and Configuring the Avaya S8400 Server January 2008
19
Table 6 lists the possible uses of the PE interface for an S8400.
About SSH
Secure Shell (SSH) is both a computer program and an associated network protocol that you
use to log in to and run commands on a networked computer. SSH provides secure encrypted
communications between two untrusted hosts over an insecure network. Avaya strongly
recommends that you use SSH instead of Telnet for most interactive connections to the Avaya
servers and other devices on a customer network.
To use SSH, a third-party SSH client must be installed on your computer. PuTTY is one such
client. You can download PuTTY from http://www.putty.nl/download.html
.
You can use SSH to access the following devices:
● The S8300, S8400, S8500, and S8700-series Servers on Release 3.1 or later of
Communication Manager
Table 6: Use of the PE interface on the S8400 Server
Possible functions of
the PE interface
Status of the function
on the S8400 Server
Administration needed?
Registration The PE interface is
always enabled for
registration.
No. The Communication Manager
software automatically enables the use
of the PE interface for registration.
H.248 gateway
registration
H.248 gateway
registration is enabled by
default.
No. The H.248 gateway enabled field
on the ip-interface procr form defaults
to yes on an S8400 Server. To disable
the H.248 registration, you can change
the H.248 gateway enabled field on the
ip-interfaces procr form to no.
H.323 endpoint
registration
H.323 endpoint
registration is enabled by
default.
No. The H.323 endpoint enabled field
on the ip-interface procr form defaults
to yes on an S8400 Server. To disable
H.323 endpoint registration, change the
H.323 enabled field on the ip-interfaces
procr form to no.
Adjunct connectivity Adjunct connectivity is
enabled by default.
Yes. You must administer adjuncts on
the S8400 Server.