Avaya S8400 - Methods of Configuring a Server; Configuring the Server Manually; Setting the Date, Time, and Time Zone

Methods of Configuring a server
Installing and Configuring the Avaya S8400 Server January 2008
31
11. In the Enter key or password field and the Re-enter key or password field: Enter the
password.
12. In the Force password/key change on next login section: Leave the default to no.
13. Click Submit.
Methods of Configuring a server
The server can be configured using one of the following methods:
1. Configuring the server manually
on page 31 using Integrated Management Maintenance
Web Pages
2. The Avaya Installation Wizard with the Electronic Pre-installation Worksheet (EPW)
3. The Avaya Installation Wizard interactively
Configuring the server manually
Setting the date, time, and time zone
!
Important:
Important: Be sure to set the date, time, and time zone before manually configuring the
server. Failure to do so may cause network problems.
To set the date, time, and time zone:
1. From the Main Menu, under Server, click Server Date/Time.
2. In the Server Date/Time window, verify the date and time are correct. If the date and time
are incorrect:
a. Enter the date
b. Enter the time
c. Enter the time zone
d. Click Submit
!
WARNING:
!
WARNING: If you set time zone, you must reboot the server.
e. Reboot the server:
1. Click Shutdown Server under the Server heading.