Avaya S8400 - Chapter 4: Server Configuration; Opening the Maintenance Web Interface; Copying Files to the Server

Opening the Maintenance Web Interface
Installing and Configuring the Avaya S8400 Server January 2008
29
Chapter 4: Server configuration
After you install the Communication Manager software, you must use the Avaya Installation
Wizard to configure the server.
This section covers the following tasks:
● Copying files to the server on page 29
● Creating a super-user login on page 30
● Configuring the server manually on page 31
● Running the Avaya Installation Wizard on page 35
● Verifying the server connection to the customer LAN (if provided) on page 36
● Enabling firewall settings on page 37
● Enabling network time servers on page 38
● Administering IA 770 embedded messaging on page 39
Note:
Note: Ensure that you have the completed Electronic Preinstallation Worksheet (EPW)
before you start this process.
Note:
Note: Ensure that your networking and Web browser settings are correct. For more
information, see Configuring the network for Windows 2000 and XP
on page 76.
Opening the Maintenance Web Interface
You can use the Maintenance Web Interface to copy license files and authentication files,
service packs, and MPCupdate files from the Services laptop to the server. For how to open the
Maintenance Web Interface, see Accessing the Maintenance Web Interface
on page 74.
Copying files to the server
1. From the Maintenance Web Interface, under Miscellaneous, click Download Files.
2. Select File(s) to download from the machine I’m using to connect to the server.