Installing and Configuring the Avaya S8400 Server January 2008 7
Chapter 1: Introduction
Use these procedures to install Avaya Communication Manager and configure a new Avaya
S8400 Server and the associated components.
To configure the server, use the Avaya Installation Wizard. To configure gateways and other
hardware components, use the following two administration interfaces:
● The Maintenance Web Interface
● The command line interface, either directly or through Secure Shell (SSH), Telnet, or a
terminal emulation program such as Avaya Native Configuration Manager.
This installation document includes the following information:
● Pre-installation requirements on page 9
● Configuring the SNMP modules in the UPS on page 21
● Server configuration on page 29
● IP interface translations on page 41
● IP interface configuration on page 45
● Postinstallation administration on page 51
● Installation verification on page 59
● Server access on page 69
● Installation troubleshooting on page 79
Audience
This documentation is for the following people who install and configure the server components:
● Trained field installation and maintenance personnel
● Technical support personnel
● Authorized business partners
To Next Page
Loading...
