Verifying connectivity to the server
Installing and Configuring the Avaya S8400 Server January 2008
49
Figure 5: SIPI LED display for static address
Verifying connectivity to the server
1. Open the Maintenance Web Interface and log in as craft.
2. Under Diagnostics, click Ping and select All IPSIs, UPS(s) to verify connectivity to these
units.
3. Click Execute Ping.
4. Verify that all endpoints respond correctly.
Figure notes:
1. SIPI has a static IP address 2. SIPI has connectivity and an IP address
ledlip1 KLC 030502
1
2
CLK
S
E
R
V
I
C
E
N
E
T
W
O
R
K
To Next Page
Loading...
