Configuring Basic Gatekeeper Settings
About this task
Configure the gatekeeper settings if your Avaya XT Series works with one. A gatekeeper routes
audio and video H.323 calls by resolving dial strings (H.323 alias or URI) into the IP address of an
endpoint, and handles the initial connection of calls. To modify advanced gatekeeper settings, see
Deployment Guide for Avaya XT Series.
Procedure
1. Access the Quick Setup Wizard from the endpoint, as described in Configuring Basic
Settings with the Quick Setup Wizard on page 34, and skip to this step.
2. Configure the gatekeeper connection as described in the following table.
Ask your system administrator to help configure these fields.
Field Description
Use Gatekeeper Choose whether this endpoint is registered to a gatekeeper, like
the H.323 Gatekeeper.
Mode or Automatic IP
Address
Choose whether the endpoint is configured to automatically
detect the gatekeeper. For more information, ask your network
administrator.
Gatekeeper address Enter the IP address or DNS name of the gatekeeper.
E.164 Enter the H.323 number required to dial the endpoint.
3. If you are registering your endpoint to a SIP server, select Next and continue with
Configuring Basic SIP Settings on page 38. Otherwise, select Done to complete the
Quick Setup Wizard.
For Avaya XTE240 only, to configure using your keyboard and mouse to navigate the
menus, continue with
Installing Avaya IX Room System XT Control to Use Keyboard and
Mouse (Avaya XTE240) on page 39.
Related links
Configuring Basic Settings with the Quick Setup Wizard on page 34
Configuring Basic SIP Settings
About this task
This section explains how to register your XT Series to the SIP server.
The XT Series can function in a SIP environment, where endpoint names or numbers are
managed by SIP servers, not gatekeepers. You can dial an endpoint by entering its name or
number like 1234 or joe_smith, rather than remembering its IP address, where the SIP server
routes the call correctly. To do this, the SIP server must register all endpoints to maintain the
mapping list of names/numbers and endpoints to successfully route calls.
Before you begin
Access the quick setup wizard from the endpoint or web interface, as described in
Configuring
Basic Settings with the Quick Setup Wizard on page 34, and skip to this step.
Getting Started
June 2019 Avaya IX Video Conferencing XT Series User Guide 38
Comments on this document? infodev@avaya.com
To Next Page
Loading...
