57
Hotkey Control
Enable hotkey control to use keyboard control camera’s movement, backlight, and Smart Framing.
1. Select “Settings”
2. Set Hotkey Control to “On”.
3. A hotkey description as below figure shown:
4. When hotkey control is enabled, a hotkey tip w ill display when mouse is moved to the PTZ control
button in PTZ mode.
5. If the hotkey function is enabled after installed PTZApp, PTZApp auto launch next time PC reboot.
Therefore, the customer can use all the hotkey commands since PTZApp is auto running in
system tray.
To Next Page
