To Next PageTo Next Page
Need help?Do you have a question about the Avery Dennison 64-Series and is the answer not in the manual?
General| Technology | Thermal Transfer |
|---|---|
| Maximum Print Width | 4.09 inches (104 mm) |
| Print Resolution | 203 dpi |
| Connectivity | USB, Ethernet |
| Label Material Compatibility | Paper |
| Label Adhesive Type | Permanent, Removable |
| Label Core Size | 3 inches (76.2 mm) |
| Supported Operating Systems | Windows |
| Label Width Range | 0.75 inches to 4.09 inches (19 mm to 104 mm) |
Steps to remove the printer from its shipping box and packaging.
Shows operating conditions, parameters, values, status, and errors.
Explains the multifarious operating functions of the buttons and menu structure.
Printer settings made when offline; print jobs received but not processed.
Print jobs received and processed immediately; displays data transfer status.
Steps to connect the printer power and data cables to a host.
Step-by-step guide for inserting CF/SD cards.
Step-by-step guide for removing CF/SD cards.
Lists Easy Plug commands to output the current realtime clock value.
Parameters for material type, length, width, and sensor type.
How to print status reports for testing and settings verification.
Lists suitable printers and firmware versions for temperature compensation.
Explains how print contrast depends on printhead temperature.
Describes typical use of start signals in print-and-apply systems.
Lists interfaces for start signal input based on printer type.
How the light barrier acts as a signal source for certain dispenser types.
Lists suitable printers and firmware/CPU board requirements for standalone operation.
Connecting and using a keyboard for simplified data entry.
Explains how the printer operates without a host computer.
How to select print job or firmware files from a memory card.
Process of starting print jobs, entering quantities, and handling input fields.
Steps for loading and executing firmware files from memory.
How files are executed automatically at system start.
Lists extra keyboard shortcuts for printer operation.
Defines input field types and their Easy Plug commands for print jobs.
Demonstrates creating text files for print jobs with specific content.
Choosing serial or other interfaces for data input.
Notes on character sequences for data input and processing.
Lists hardware and firmware requirements for Ethernet connection.
Common issues and checks for Ethernet connection and IP parameters.
How to access printer settings via a web browser.
Sets the machine offline during dispensing mode.
Switches into standalone mode.
Triggers a reset of the printer.
Steps to connect to the printer using FTP for file transfer.
Lists suitable printers, firmware, and WLAN cards for wireless connection.
Lists access point and cable requirements for WLAN setup.
How to connect the access point to the PC and check the WLAN connection.
Sending a print job to the printer via the lpr command.
Lists printers and firmware versions for saving/transferring settings.
Discusses scenarios for reinstalling or transferring printer settings.
How to automatically load settings from a memory card at printer startup.
Lists suitable printers, firmware, and requirements for OLV barcode scanner.
Explains the function of the OLV scanner for rating barcode quality.
Provides an example of a complete printer setup file configuration.
