2-10 MonarchNet2 Operating Instructions
Wireless Mode
The wireless mode sets how you communicate with your wireless
network.
In Ad-Hoc mode, you do not need an access point. Ad-Hoc mode is also
called peer-to-peer (point-to-point) communications, so as long as the
devices are in range, they will connect and communicate with each other.
Infrastructure mode requires an access point to communicate.
Note: If communicating in a mixed environment where both Ad-Hoc and
infrastructure mode are used, make sure the SSIDs are unique in
both modes.
From the Main Menu: Select Setup, Network, Wireless. Then follow
these steps.
1. Press or until you see
WIRELESS
Wireless Mode
2. Press Enter/Pause. The current setting is displayed, for example:
WiFi Mode
Ad Hoc
3. Press or to change the setting. After you display the option you
need, press Enter/Pause.
4. Press Escape/Clear until you see the Main Menu.
To Next Page
Loading...
