Avery Dennison MonarchNet2 9855 - Page 72

4-12 MonarchNet2 Operating Instructions
SHow PRN BATchoptions {CLearfields/ NUmberofparts/
CUTOption/ CUTMultiple/ CUTLTicketprompt/
CUTAfterbatchprompt/ NOCutbeforeprompt/ CUTLStripprompt/
PRintmultiple/ QUantity}
Shows the specified batchoptions parameter’s current setting. If no parameter
is specified, it shows the current settings of all parameters in the batchoptions
category.
SET PRN COMmunication [BAudrate/ WOrdlength/ STopbits/
PArity/ FLowcontrol/ PPort/ PMode] value
Sets the specified communication parameter to the specified value.
SHow PRN COMmunication {BAudrate/ WOrdlength/ STopbits/
PArity/ FLowcontrol/ PPort/ PMode}
Shows the specified communication parameter’s current setting. If no
parameter is specified, it shows the current settings for all parameters in the
communication category.
SET PRN CONtrolcharacters [STartheader/ PAramseparator/
QUotedstrings/ FIeldseparator/ ENDheader DAtaescape/
IMmediatecmd/ ENQRequest/ ENQTerminator/ JObterminator]
value
Sets the specified control character to the specified value. Setting the
immediate command character enables immediate commands; setting the ENQ
status request character enables ENQ status polling.
SHow PRN CONtrolcharacters {STartheader/ PAramseparator/
QUotedstrings/ FIeldseparator/ ENDheader/ DAtaescape/
IMmediatecmd/ ENQRequest/ ENQTerminator/ JObterminator}
Show the specified control character’s current setting. If no parameter is
specified, it shows the current settings of all parameters in the control
characters category.
CLear PRN CONtrolcharacters [DAtaescape/ IMmediatecmd/
ENQRequest/ ENQTerminator/ JObterminator]
Clears the specified control character. Clearing the immediate command
character disables immediate commands. Clearing the ENQ status request
character disables ENQ status polling.