Console Commands 4-21
SET IP BANNER [EN/DIS]
Sets printing of LPD job banners.
SET IP BOot n
Sets number of retries (n) for DHCP, BOOTP, RARP
SET IP CHKSUM [EN/DIS]
Enables or disables IP receive checksum.
SET IP FTime [EN/DIS]
Enables or disables fast timeout.
SET IP FTP [EN/DIS]
Selects whether to use the FTP protocol.
SET IP HTTP [EN/DIS]
Selects whether to use the HTTP protocol.
SET IP KEepalive n
Sets keep alive interval (n) in minutes.
SET IP LPD [EN/DIS]
Selects whether to use the LPD protocol.
SET IP MEthod [AUTO/BOOTP/RARP/DHCP/STATIC]
Sets method of getting IP address.
SET IP PING aa.bb.cc.dd
Sends IP ping packets to test the host connection.
SET IP PRObe [EN/DIS]
Enables or disables the TCP connection probe.
SET IP RARp nn
0 Both
1 no subnet
2 no router
3 neither
Default (0) - IP address is set with subnet mask and router that is the same
address as host.
To Next Page