84
Model E1070 Indicator Service Manual
DATE
(Set date)
1. Access the Supervisor menu by pressing and holding the ESC key for 3-
5 seconds. . .
PASS_ is displayed.
2. Key in the password, 1793, and press ENTER. . .
DATE is displayed. Use this to set the current date.
3. Press the PRINT key. . .
TYPE0 is displayed. Dates styles are listed below along with
number you enter to create that style:
0=MM/DD/YY
1=MM/DD/YYYY
2=DD/MM/YY
3=DD/MM/YYYY
4. Scroll through the choices using the TARE or UNITS key and press the
ENTER key when your choice is displayed. . .
M XX is displayed. This stands for month.
5. Key in the month number (01 for Jan., 02 for Feb., . . .12 for Dec) and
press the ENTER key. . .
DD XX is displayed. DD stands for date and XX represents the
current value.
6. Key in the date and press the ENTER key .
YY XX is displayed. YY stands for year and XX represents the
current value.
6. Key in the year (04=2004, etc.) and press the ENTER key. . .
DATE is displayed.
Password for the Supervisor
menu is 1793.
See Figure 15 to reference the
Supervisor’s menu.
Supervisor Menu—(continued)
While in a menu, the fan
graphs at the top of the display
flash as a reminder.
To Next Page
Loading...
