5
Model E1070 Indicator Service Manual
Introduction
About This Manual
This manual covers the information you need to configure and service your
Model E1070 Indicator.
Major sections of this manual are headed by titles in a black bar like Intro-
duction above. Subheadings appear in the left column. Instructions and text
appear on the right side of the page. Occasionally notes, tips, and special
instructions appear in the left column.
Front Panel
The front panel, shown in Figure 1, consists of the keys and display.
Figure 1
E1070 front panel
Plug the Model E1070 into
properly grounded socket-
outlet of the correct voltage,
installed near the equipment
and easily accessible. Never
use the unit without an appro-
priate earthground connection.
Any computer based system
should have a separate,
grounded power circuit. We
recommend one for the
Model E1070.
See the System Block Diagram
or Main Board Assembly pages
in the technical illustrations at
the back of this manual for
wiring instructions.
To Next Page
Loading...
