Axis ME-02/N/LCD - Technical Data

12 ME-02 USER MANUAL MD004
_____________________________________________________________________________________________
5.4 Technical data
Parameter
Assignment
For scale III class one and two-range
Max verification division
6000e
Readout unit (d)
1, 2, 5, 10, 20 (g. dkg, kg)
Verification unit (e)
Any
Tare range
Full
Maximal weighing sensors quantity
6 pcs
Internal division
1 : 160 000
Power supply
~230V 50Hz or external supply AC: 230V 50Hz / DC: 12V
or external accumulator 12V + charger
Transducer supply
5V 25Hz (choper)
Measurement voltage range
-10 mV ÷ 10 mV or 0 mV ÷ 10 mV
Smallest possible input signal that that
corresponds to e division
0,3 μV
Sensors impedance
40÷4000 
Working temperature range
- 10 C ÷ +40 C
Admissible error fraction
0,5
Connecting weighing sensors
4 or 6 wire system
Wire lenght to section maximal ratio
75 m/mm
2
Display
LCD, backlight, digits height 14mm
Meter basic functions
- batching (100 recipes, 6 or 8 outputs)
- gross and net weight indication
- automatic and semi-automatic zeroing
- semi-automatic tare
Serial interfaces
RS232C, RS485, Ethernet, protocols: AXIS, Modbus RTU
Outputs
- batching outputs (WY )
- additional outputs (WY+) - option
- analog output 4-20mA or 0-10V – option
Output load (transoptors)
100mA / 24V DC
Mounting system
Protection degree
IP65
Housing material
Stainless steel, acid-resistant
Dimensions
238x182x77mm
Weight
2,3kg
Scale’s metrological parameters are situated on scale’s name plate.