Axis ME-02/N/LCD - Batching Repetition

6 ME-02 USER MANUAL MD004
_____________________________________________________________________________________________
1.4 Batching repetition
A
0.00
StoP
O
END
0.00
READY
Prod nr
ENTER
Start
Successive batching of the same product recipe doesn’t require
inscribing again product number or bags number, only press START
and then ENTER.
Batching process starts with automatic tare. During batching actual
weight on platform is displayed.
Each ingredient batching end is signalized by END diode.
End of product batching process is signalized by StoP indication.
Batching can be stopped at any time by pressing CLR key.