Axis ME-02/N/LCD User Manual

40 ME-02 USER MANUAL MD004
_____________________________________________________________________________________________
12.2 Reference zero inscribing (Zer)
In order to confirm scale’s efficiency after each turning on reference zero test is performed, which depends on
comparison of actual zero with reference zero (stored in memory). ±10% difference or more when the scale is
unloaded is signalized by ”unLOAd” communicate and the scale isn’t able to start work.
In newly activated scale inscribing zero reference value is done independently to „unLOAd” communicate
especially if initial load is changed (eg. additional container on weighing platform). After inscribing new zero value
check scale’s working when max load.
Press Program key.
Press Enter key when MEtEr is displayed, then ZEr.
When internal division is displayed press  0  key
and wait until zero indication.
Attention: In verificated (legalized) scales access to ZEr option is blocked. To unlock it use the jumper on main
board (look 12.1 chapter).
0
MODE
MODE
MODE
MODE
g
g
MODE

Axis ME-02/N/LCD Specifications

General

Brand	Axis
Model	ME-02/N/LCD
Category	Measuring Instruments
Language	English