Axis ME-02/N/LCD User Manual

ME-02 USER MANUAL MD004 5
_____________________________________________________________________________________________
1.3 Bags batching process
Batching is executed according to previously programmed settings (recipe) (look Batching programming).
In case when READY diode doesn’t light press ENTER.
Press START (if READY diode doesn’t light, press ENTER).
When Nr Prod is displayed, insert program number previously saved in
memory and press ENTER, eg. 1 ENTER.
If there are many products stored in memory then WAIt communicate will
show up.
CYCLES communicate (number of bags to process) and afterwards
previously inscribed value shows up.
Inscribe quantity of bags and confirm by ENTER.
Attention: Quantity of bags can be inscribed at any time by using B key.
Batching process starts with automatic scale tare. During batching actual
weight on platform is displaying.
Each ingredient batching end is signalized by END diode.
End of product batching process is signalized by StoP indication.
Batching can be stopped at any time by pressing CLR key.
Prod nr
CYCLES
123
A
0.00
StoP
O
0.00
WAIt
READY
END
READY
0
0
.
.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
Enter
Enter
Start
Start

Axis ME-02/N/LCD Specifications

General

Brand	Axis
Model	ME-02/N/LCD
Category	Measuring Instruments
Language	English