20 ME-02 USER MANUAL MD004
_____________________________________________________________________________________________
7. Usage general rules
1. After switching-on the power, the scale proceeds with self-tests and zeroing the scale. During start-up the
scale should not be loaded (does not apply to tank scales, where scales are not zeroed after start-up).
2. Before each measurement make sure that zero indicator is displayed. If zero indicator does not displayed or “--
--“ communicate appears, press 0 key and wait until zero indication and zero indicator appears.
3. The scale is equipped with a tare equal to its range. To tare the scale press T key. Storing a tare value
does not extend measuring range, but only subtracts it from a load placed on a pan. If the scale is not loaded
T key does not operate – to zero the scale press 0 key.
4. Weighing result should be read when the indicator " " lights, which signalises stabilisation of a result.
5. Weighed sample should be placed in the centre of the platform.
Do not drop weighed objects on the platform!
Do not overload the scale more then 20% of maximum load
(Max).
6. Protect the scale against dust, aggressive dusts and liquids. To clean it is advised to wash the scale with water
and dry it afterwards.
To Next Page
Loading...
