Axis ME-02/N/LCD User Manual

30 ME-02 USER MANUAL MD004
_____________________________________________________________________________________________
10. Batching product
Before product batching start it is necessary to program product (Program key, read previous chapter). Influence
on batching process also have settings made earlier using F key and ModE option.
First batching starts with inscribing number of cycle (description in next chapters).
Each another batching of the same product starts after pressing:
EnterStart
The same effect enables E key and external button RESTART.
a. Batching set quantity of cycles
In order to do first batching user must press Start key, inscribe product number (batching program) and inscribe
quantity of cycles according to sequence:
EnterStart 1 2 3 ...
Enter1 2 3 ...
Batching stops automatically. User can also manually stop it at any moment using:
To insert batching quantity (batching cycles) user can also use B key (before Start) :
Enter1 2 3 ...
B
Example of settings (F key):
ModE
UP

CYCLE
MASS [kg]
CYCLE S [n]
1
COntIn
End nEt
no Stb

End Stb
No StbS
dELAY C
dELAY T
tArE C
COrrECt
EMPtY
PAUSE C
StoP C
6 COMP

Clr

Axis ME-02/N/LCD Specifications

General

Brand	Axis
Model	ME-02/N/LCD
Category	Measuring Instruments
Language	English