Axis ME-02/N/LCD - Cyclic Batching (Continuous)

32 ME-02 USER MANUAL MD004
_____________________________________________________________________________________________
b. Cyclic batching (continuous) according to recipe
COntin option activation causes after finishing programmed quantity of cycles that the scale continues to work:
wait for emptying and automatically starts new cycle.
Batching start sequence:
EnterStart 1 2 3 ...
Enter1
Or when repeated:
EnterStart
Settings example (F key):
ModE
UP

CYCLE
MASS [kg]
CYCLES [n]
1
COntIn

End nEt
no Stb

End Stb
No StbS
dELAY C
dELAY T
tArE C
COrrECt
EMPtY
PAUSE C
StoP C
6 COMP
