6-25
■ Key lock setup
(1) In the operation display mode, keep the [para] key
pressed for 2 sec. or longer.
>> The unit then enters the parameter setting mode.
(2) In the parameter setting display mode, keep the [para]
key pressed for 2 sec. or longer.
>> The display is then changed to the setup setting
display.
(3) Press the [para] key several times.
>> Display the setup setting [Key lock].
(4) Press the [<], [], or []key to select the set value in
[LoC] from the following:
0: All settings are possible.
1: Mode, event, operation display, SP, UF, lock, manual MV, and mode
key can be set.
2: Operation display, SP, UF, lock, manual MV, and mode key can be
set.
3: UF, lock, manual MV, and mode key can be set.
>> When no keys are pressed for 2 sec. or longer, the flashing of the numeric
value is stopped to set the currently displayed value.
(5) Press the [mode] key.
>> The display is returned to the operation display.
Handling Precautions
When two sets of passwords (1A and 1B, 2A and 2B) are met, the set
value can be changed.
To Next Page
Loading...
